IES-1000 User’s Guide

 

 

Table 15-2 Static VLAN Setup

 

 

 

 

 

LABEL

DESCRIPTION

 

 

 

 

 

 

Management

The management VLAN ID is the number of the VLAN through which you manage the IES-

 

 

VLAN ID

1000. The management VLAN defines which ports you can use to manage the IES-1000.

 

 

 

You cannot manage the IES-1000 via a port that is not a member of the management VLAN.

 

 

Apply

Click Apply to save your changes back to the IES-1000's volatile memory. The IES-1000

 

 

 

loses these changes if it is turned off or loses power, so use the Config Save link on the

 

 

 

navigation panel to the left to save your changes to the non-volatile memory when you are

 

 

 

done configuring.

 

 

VLAN ID

This field displays the ID number of the VLAN. Click an entry’s VLAN ID to go to a screen

 

 

 

where you can edit that VLAN.

 

 

 

 

 

 

Name

This field displays the name of this VLAN.

 

 

 

 

 

 

Active

This field displays Yes when the entry is activated and No when the entry is empty.

 

 

 

 

 

 

Add

Click this button to configure a new VLAN.

 

 

 

 

 

 

Delete

Select a VLAN(s)’s Delete check box and click the Delete button to remove the VLAN.

 

 

 

 

 

15.8.1Add or Edit VLAN Static Entry Screen

Click VLAN Setup in the navigation panel and then Add or a VLAN ID in the VLAN Setup screen.

Use this menu to set up IEEE 802.1Q VLAN parameters for the IES-1000.

Figure 15-2 Add VLAN Static Entry

VLAN

15-5