Table
MODULE |
| COMMAND | DESCRIPTION |
|
|
|
|
|
| disable <port> | Disables 802.1X security on the |
|
|
| specified port. |
|
| control <port> <autoauth | Sets how the specified port should be |
|
| unauth> | authenticated. |
|
| reauth <port> <onoff> | Turns |
|
|
| the specified port. |
|
| period <port><value> | Configures how often the specified |
|
|
| port should be |
|
| status <port> | Displays 802.1X security status on the |
|
|
| specified port. |
| radius | ip <addr> | Sets the external RADIUS server IP |
|
|
| address. |
|
| port <portnum> | Sets the external RADIUS server port |
|
|
| number. |
|
| secret <secret> | Sets the authentication and encryption |
|
|
| key. |
|
| show | Displays the external RADIUS server |
|
|
| settings. |
edd |
|
|
|
| version |
| Displays Ethernet device driver |
|
|
| information. |
| test | <ip> | Enables a |
|
|
| around. |
| set timeout | [<# of minutes>] | Sets the Ethernet test timeout value. |
ethernet | set | auto <on off> | Enables/disables Ethernet port auto |
|
|
| negotiation. |
|
| duplex <full half> | Sets the Ethernet port to full or half |
|
|
| duplex. |
|
| speed <100 10> | Sets the operating speed of the |
|
|
| Ethernet port (100M or 10M). |
| status |
| Shows Ethernet link status (auto- |
|
|
| negotiation, duplex, speed). |
| save |
| Saves Ethernet settings. |
exit |
|
| Ends the console or telnet session. |
flashfs |
|
|
|
| config |
| Displays the configuration of the flash |
|
|
| file system. |
| default |
| Shows the current partition. |
|
| <partition> | Selects a partition as the current flash |
|
|
| file system. |
Commands Introduction |