ZyXEL Communications IES-1000 manual 187

IES-1000 User’s Guide

Table 22-1 Commands

MODULE		COMMAND	DESCRIPTION
	loopback	<portNo> local f5	Does a local/OAM F5 loopback test on
			the specified GSHDSL port.
	stat	ch <port> <vpi> <vci>	Shows the statistics of the specified
			PVC channel.
		chs [<start port> [<end port>]]	Shows the statistics of all PVC
			channels in all ports or in the specified
			port.
	clear	ch <port> <vpi> <vci>	Clears the statistics of the specified
			PVC channel.
		chs [<start port> [<end port>]]	Clears the statistics of all PVC
			channels in all ports or in the specified
			port.
gshdsl			The gshdsl commands apply to the
			SAM module.
	config	save	Saves configuration of GSHDSL
			module to nonvolatile memory.
	enable	ch <port> <vpi> <vci>	Enables the specified PVC channel(s).
		chs [<start port> [<stop	Enables all PVC channels for specific
		port>]]	ports.
		port <portNo>	Enables the specified GSHDSL port.
		ports	Enables all GSHDSL ports.
	disable	ch <port> <vpi> <vci>	Disables the specified PVC
			channel(s).
		chs [<start port> [<stop	Disables all PVC channels for the
		port>]]	specified ports.
		port <portNo>	Disables the specified GSHDSL port.
		ports	Disables all GSHDSL ports.
	lineinfo	<portNo>	Shows the statistics of the specified
			GSHDSL ports.
	lineperf	<portNo>	Shows the line quality of the specified
			GSHDSL port.
	set	ch <port> <vpi> <vci> <pvid>	Creates a new PVC channel, or
		<priority> <vcp name>	modifies an existing one.
		ch <port> <vpi> <vci> super	Creates a super channel, or modifies
		<vcp name>	an existing one.
		profile <profile name> <Cmax>	Sets the specified profile a maximum
		[<Cmin>] [annexA annexB]	and a minimum rate, and a PSD
			region.
		port <portNo> <profile>	Applies a specified profile setting to a
			GSHDSL port.
		ports <profile>	Applies the specified profile setting to
			all GSHDSL ports.

22-12 Commands Introduction