ZyXEL Communications IES-1000 18.2.1Secured Client Screen, LABEL, Apply, Reset, LABEL, Backup, DESCRIPTION, Config Save, Maintenance, Maintenance, DESCRIPTION, Maintenance, Secured Client

IES-1000 User’s Guide

	Table 18-1 Maintenance
LABEL	DESCRIPTION
Backup	Use the Backup link to save your current configuration to a computer.
Configuration
UNIX System Log	Select this check box to activate syslog (UNIX system logging) and then configure the
	UNIX syslog parameters described in the following fields.
System Log IP	Enter the IP address of the syslog server.
Address
Log Facility	Select one of 7 different options from the drop-down list box. The log facility allows you to
	log the message to different files in the server. Please refer to your UNIX manual for more
	details.
Apply	Click Apply to save your changes back to the IES-1000's volatile memory. The IES-1000
	loses these changes if it is turned off or loses power, so use the Config Save link in the
	navigation panel on the left to save your changes to the non-volatile memory when you
	are done configuring.
Reset	Click Reset to begin configuring this page afresh

18.2.1Secured Client Screen

Click Maintenance in the navigation panel and then Secured Client in the Maintenance screen to open the Secured Client Setup screen.

The Secured Client Setup screen configures trusted computers that may manage the IES-1000.

		Figure 18-2 Secured Client Setup
The following table describes this screen.
		Table 18-2 Secured Client Setup
	LABEL	DESCRIPTION
	Maintenance	Click Maintenance to return to the main maintenance screen.

18-2 Maintenance