IES-1000 User’s Guide

 

 

Table 10-17 Edit 802.1x Setup

 

 

 

 

 

LABEL

DESCRIPTION

 

 

 

 

 

 

Reauthentication

Select (On) if a subscriber has to periodically re-enter his or her username and password to

 

 

 

stay connected to the port.

 

 

 

 

 

 

Reauthentication

Specify how often (60~65535 seconds) a subscriber has to re-enter his or her username and

 

 

Timer

password to stay connected to the port.

 

 

 

 

 

 

Apply

Click Apply to save your changes back to the IES-1000's volatile memory. The IES-1000

 

 

 

loses these changes if it is turned off or loses power, so use the Config Save link on the

 

 

 

navigation panel to the left to save your changes to the non-volatile memory when you are

 

 

 

done configuring.

 

 

 

 

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

 

 

 

10.5.14Fast Mode VLAN ID Setup Screen

Click Fast Mode VLAN ID in the Bridge Setup screen to open this screen.

 

 

Figure 10-21

Bridge Fast Mode VLAN ID Setup

The following table describes this screen.

 

 

 

Table 10-18

Bridge Fast Mode VLAN ID Setup

 

 

 

 

 

LABEL

 

DESCRIPTION

 

 

 

 

Bridge Setup

Click this link to go to the Bridge Setup screen.

 

 

 

 

Getting Started Screens

10-21