IES-1000 User’s Guide

4.4.1Attaching the Mounting Brackets to the IES-1000

Step 1. Position a mounting bracket on one side of the IES-1000, lining up the four screw holes on the bracket with the screw holes on the side of the unit (see the figure shown next).

Failure to use the proper screws may damage the unit.Figure 4-1 Attaching the Mounting Brackets to the IES-1000

Step 2. Using a #2 Philips screwdriver, install the M3 flat head screws that came with the brackets through the mounting bracket holes into the IES-1000.

Step 3. Repeat Step 1 and Step 2 to install the second mounting bracket on the other side of the unit.

You may now mount the IES-1000 on a rack. Proceed to the next section.

4.4.2Mounting the IES-1000 on a Rack

Step 1. Position a mounting bracket (that is already attached to the IES-1000) on one side of the rack, lining up the two screw holes on the bracket with the screw holes on the side of the rack (see the figure shown next).

Failure to use the proper screws may damage the unit.

4-2

Hardware Installation