IES-1000 User’s Guide

 

Table 10-8 Bridge MAC Filter Entry Add

LABEL

DESCRIPTION

 

 

Apply

Click Apply to save your changes back to the IES-1000's volatile memory. The IES-1000

 

loses these changes if it is turned off or loses power, so use the Config Save link on the

 

navigation panel to the left to save your changes to the non-volatile memory when you are

 

done configuring.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

10.5.3MAC Count Filter Setup Screen

Click MAC Count Filter in the Bridge Setup screen to open this screen.

Use this screen to limit the number of MAC addresses that may be dynamically learned or statically configured on a DSL port.

 

Figure 10-10 MAC Count Filter Setup

The following table describes the labels in this screen.

 

Table 10-9 MAC Count Filter Setup

 

 

LABEL

DESCRIPTION

 

 

Bridge Setup

Click this link to go to the Bridge Setup screen.

 

 

Port Number

This field displays a DSL port number. Click an entry to go to a screen to edit the number of

 

MAC addresses that may be learned on that port.

 

 

Filtering Enable?

This field tells whether or not MAC address count filtering has been enabled for that port.

 

 

Max Dynamic

This field’s first number displays how many dynamically learned MAC addresses are recorded

MAC Count

for a port.

 

This field’s second number displays the limit of how many MAC addresses may be dynamically

 

learned on the port.

 

 

10-10

Getting Started Screens