IES-1000 User’s Guide

 

 

Figure 12-7 Add G.SHDSL Port Bonding

 

 

Table 12-7 Add G.SHDSL Port Bonding

 

 

 

 

LABEL

 

DESCRIPTION

 

 

 

 

Port Setup

 

Click this link to go to the Port Setup screen.

 

 

 

 

Bonding Name

 

Type a name to identify this port bonding group.

 

 

 

Mode

 

Select the type of bonding units that you want to bond together into a port bonding group

 

 

(single logical connection) and which side of the connection this port bonding group is.

 

 

Select 2-wireto bond individual ports (each port uses two wires) together.

 

 

Select 4-wireto bond 4-wire (two port) n-wire groups together.

 

 

Select 8-wireto bond 8-wire (four port) n-wire groups together.

 

 

 

 

 

 

You must use the Add G.SHDSL N-wire Group screen to configure the 4 or 8-

 

 

wire bundled groups before you can use this screen to bond them.

 

 

 

Select STU-Cto set this end of the connection as the SHDSL Terminal Unit – Central side.

 

 

Select STU-Rto set this end of the connection as the SHDSL Terminal Unit – Remote side.

 

 

You can bond multiple groups of ports as long as they do not overlap. One SAM1008 module

 

 

can have both STU-C and STU-R groups.

 

 

Make sure that G.SHDSL ports one through four are all the same end of their connections (all

 

 

STU-C or all STU-R).

 

 

Make sure that G.SHDSL ports five through eight are all the same end of their connections (all

 

 

STU-C or all STU-R).

 

 

G.SHDSL ports one through four do not need to be set to be the same end of the connection

 

 

as G.SHDSL ports five through eight. For example, G.SHDSL ports one through four could be

 

 

set to be STU-C while G.SHDSL ports five through eight are set to be STU-R.

 

 

 

 

G.SHDSL Module Port Setup

12-11