IES-1000 User’s Guide

 

Table 10-16 RADIUS Server Setup

LABEL

DESCRIPTION

 

 

Shared Secret

Specify a password (up to 31 alphanumeric characters) as the key to be shared between the

 

external RADIUS server and the IES-1000. This key is not sent over the network. This key

 

must be the same on the external RADIUS server and the IES-1000.

Apply

Click Apply to save your changes back to the IES-1000's volatile memory. The IES-1000

 

loses these changes if it is turned off or loses power, so use the Config Save link on the

 

navigation panel to the left to save your changes to the non-volatile memory when you are

 

done configuring.

Reset

Click Reset to begin configuring this screen afresh.

 

 

802.1X Edit Screen

Click 802.1X in the Bridge Setup screen to open the 802.1X Setup screen.

Click a port's index number in the 802.1X Setup screen to edit the port’s IEEE 802.1X settings.

 

Figure 10-20 Edit 802.1X Setup

 

Table 10-17 Edit 802.1x Setup

 

 

LABEL

DESCRIPTION

 

 

Bridge Setup

Click this link to go to the Bridge Setup screen.

 

 

802.1X Setup

Click this link to go to the 802.1X Setup screen.

 

 

Active

Select this checkbox to turn on IEEE 802.1X authentication on this port.

 

 

Control

Select Auto to authenticate all subscribers before they can access the network through this

 

port.

 

Select Force Authorized to allow all connected users to access the network through this

 

port without authentication.

 

Select Force Unauthorized to deny all subscribers access to the network through this port.

 

 

10-20

Getting Started Screens