IES-1000 User’s Guide

 

 

Table 22-1 Commands

 

 

 

 

 

MODULE

 

COMMAND

DESCRIPTION

 

 

 

 

bridge

 

 

 

 

config

save

Saves the bridge’s run time

 

 

 

configuration to nonvolatile memory.

 

 

print

Shows the bridge’s run time

 

 

 

configuration.

 

 

reset

Reloads the bridge’s run time

 

 

 

configuration from nonvolatile memory.

 

device

 

Shows the bridge settings.

 

 

add <edd xport/[1..8]>

Adds a bridge device.

 

 

delete <edd xport/[1..8]>

Deletes a bridge device.

 

 

list

Displays the bridge devices.

 

ethertype

 

Displays the types of packets that the

 

 

 

ports are set to forward.

 

 

<port> <any ip pppoe>

Sets the type of packets that a port is

 

 

 

allowed forward.

 

filter

 

Displays the filtering database.

 

filterage

 

Displays the filter age time.

 

 

<seconds>

Sets the filter age time.

 

flush

 

Clears the filtering database for all

 

 

 

ports.

 

 

<portNo>

Clears the filtering database on an

 

 

 

individual port.

 

info

 

Shows bridge information.

 

interface

files

Shows files opened by upper layer.

 

 

info

Shows ether-support driver

 

 

 

information.

 

 

stats

Shows bridge upper interface

 

 

 

statistics.

 

 

version

Shows ether-support driver

 

 

 

information.

 

portfilter

 

Displays ports to forward to.

 

 

<srcPort> <all destPorts>

Sets ports to forward to.

 

status

 

Displays bridge management

 

 

 

statistics.

 

igmpsnoop

 

Displays the multicast filtering

 

 

 

database.

 

 

flush

Clears all stored IGMP snooping

 

 

 

records.

Commands Introduction

22-3