IES-1000 User’s Guide

 

Table 18-3 Add Secured Client

LABEL

DESCRIPTION

 

 

Secured

Click this link to go to the Secured Client Setup screen.

Client Setup

 

Secured

Set the IP address of a computer that you want to allow Telnet, FTP or Web access to this IES-

Client

1000.

Address

If you enter an IP address in this field, the IES-1000 checks if the client IP address of a

 

 

computer requesting a service matches the value here. The IES-1000 immediately disconnects

 

the session if it does not match.

Apply

Click Apply to save your changes back to the IES-1000 's volatile memory. The IES-1000 loses

 

these changes if it is turned off or loses power, so use the Config Save link in the navigation

 

panel on the left to save your changes to the non-volatile memory when you are done

 

configuring.

Reset

Click Reset to begin configuring this page afresh

 

 

18.2.2Firmware Upgrade Screen

Click Maintenance in the navigation panel and then Firmware Upgrade in the Maintenance screen.

Use the Firmware Upgrade screen to upgrade the network module's firmware.

Do not interrupt the upgrade process, as it may permanently damage the network module.

The IES-1000 automatically restarts when the upgrade process is complete.

Procedure to upgrade your firmware:

Step 1. Use the network module’s Statistics screen to check its current firmware version number.

Step 2. Download and unzip the new firmware.

Step 3. Go to the Firmware Upgrade screen.

Step 4. Type the path and file name of the firmware file you wish to upload to the IES-1000 in the File Path field or click Browse to display the Choose File screen from which you can locate it. After you have specified the file, click Upload.

18-4

Maintenance