25.3.5Enable Ports Command
Syntax:
192.168.1.1 gshdsl> enable ports
This command forcibly enables all G.SHDSL ports.
25.3.6Lineinfo Command
Syntax:
192.168.1.1 gshdsl> lineinfo <port #>
where |
|
|
|
|
|
<port #> = | A port number, from 1 to 8 |
|
| ||
This command shows the line operating values of a G.SHDSL port. |
| ||||
An example is shown next. |
|
|
|
| |
192.168.1.1 gshdsl> lineinfo 2 |
|
|
| ||
2=Down Sp=0 | Tx=0 | Tr=0 | Rx=0 | Rr=0 | NM=0 T=000:00:00 |
where |
|
|
|
|
|
<2=Down> | = | The port number and whether the port is down/up (respectively). | |||
<Sp> | = | The line rate. |
|
|
|
<Tx> | = | The number of frames transmitted. |
|
| |
<Tr> | = | The number of frames transmitted with errors. |
| ||
<Rx> | = | The number of frames received. |
|
| |
<Rr> | = | The number of frames received with errors. |
| ||
<NM> | = | The noise margin in decibels. |
|
| |
<T> | = | The uptime of a port in day:hour:minute format. |
| ||
25.3.7Lineperf Command
Syntax:
192.168.1.1 gshdsl> lineperf <port #>
where |
|
<port #> = | A port number, from 1 to 8 |
This command shows the line performance counters of an G.SHDSL port
An example is shown next.
192.168.1.1 gshdsl> lineperf 7
Port=7 Sp=2048kbps NM=0db ATTEN=0db ES=0 SES=0 LOSWS=0 UAS=0 downN=0
G.SHDSL Commands |