Table
MODULE |
| COMMAND | DESCRIPTION |
|
|
|
|
|
| enable [1 2] | Turns on IGMP snooping. 1 sets |
|
|
| |
|
|
| |
|
| disable | Turns off IGMP snooping. |
|
| timeout [<seconds>] | Sets how long the |
|
|
| entries in the multicast filtering |
|
|
| database. |
|
|
|
|
| mfilter |
| Displays the multicast filtering |
|
|
| database. |
| fpvid |
| Displays default port VLAN IDs in Fast |
|
|
| Mode. |
|
| <portNo> <vid> | Sets a default port VLAN ID in Fast |
|
|
| Mode. |
| macfilter |
| Displays the MAC filtering status and |
|
|
| setting on all ports. |
|
| <portNo> | Displays the MAC filtering status and |
|
|
| setting on the specified port. |
|
| enable <portNo> | Enables the MAC filtering mechanism. |
|
| disable <portNo> | Disables the MAC filtering mechanism. |
|
| add <portNo> <mac> | Adds a source MAC address from |
|
|
| which to forward packets. |
|
| delete <portNo> <mac> | Deletes a source MAC address from |
|
|
| which to forward packets. |
| maccount | <portNo> | Displays the system’s current MAC |
|
|
| address count filter settings for that |
|
|
| port. |
|
|
|
|
|
| enable [port] | Turns on the MAC address count filter. |
|
| disable [port] | Turns off the MAC address count filter. |
|
| set <port> <max 1> <max 2> | Sets the MAC address count filter. |
| version |
| Displays bridge information. |
|
|
|
|
buffer |
|
|
|
| list |
| Displays all buffer pools. |
| info |
| Shows the current buffer pool’s |
|
|
| information. |
|
| <poolName> | Sets the current buffer pool to |
|
|
| <poolName> and shows the pool’s |
|
|
| information. |
|
|
|
|
| show |
| Shows all buffers in the current buffer |
|
|
| pool. |
Commands Introduction |