IES-1000 User’s Guide

 

Table 10-10 MAC Count Filter Edit

 

 

LABEL

DESCRIPTION

 

 

Max Static MAC

Use this field to limit the number of MAC addresses that may be statically specified for this port.

Count

For example, if you are configuring port 2 and you set this field to "5", then only five device

 

MAC addresses may be statically configured on port 2 at any one time.

 

The valid range is from “0” to “5”. “0” means no MAC addresses may be statically specified for

 

this port.

 

 

Apply

Click Apply to save your changes back to the IES-1000's volatile memory. The IES-1000 loses

 

these changes if it is turned off or loses power, so use the Config Save link on the navigation

 

panel to the left to save your changes to the non-volatile memory when you are done

 

configuring.

 

 

Cancel

Click Cancel to begin configuring this screen afresh.

 

 

10.5.5Bridge MAC Address Record Screen

Click MAC Address Record in the Bridge Setup screen to open this screen.

This screen displays a list of the MAC addresses that have connected to each individual port on the network module. The listing includes MAC addresses and the connected time (measured in seconds) for each port.

Figure 10-12 Bridge MAC Address Record

10-12

Getting Started Screens