ZyXEL Communications IES-1000 31.3.10DVLAN Getentry Command, 31.3.11VLAN List Command, Display a Dynamic VLAN Table Entry Example, Figure 31-6Example: DVLAN List Command Display

IES-1000 User’s Guide

vid	01	02	03	04	05	06	07	08	09
----	----	----	----	----	----	----	----	----	----
2		>>			>>	>>			>>
3	>>	>>				>>	>>	>>
4	>>			>>	>>			>>	>>
5		>>			>>	>>			>>
6	>>	>>				>>	>>	>>
7		>>		>>	>>			>>	>>
8	>>			>>		>>	>>	>>	>>
9		>>				>>		>>	>>

Figure 31-6 Example: DVLAN List Command DisplayIn the figure above, “” denotes “filter” and “>>” denotes “forward”.

31.3.10DVLAN Getentry Command

Syntax:

192.168.1.1 vlan1q> dvlan getentry <vid>

where

<vid> = A VLAN ID. Valid parameter range = [1 – 4094].

This command displays an entry with a specified VLAN ID in dynamic GVRP table.

Display a Dynamic VLAN Table Entry Example

The following figure is an example display of the following command.

192.168.1.1 vlan1q> dvlan getentry 2

vid	01	02	03	04	05	06	07	08	09
----	----	----	----	----	----	----	----	----	----
2		>>			>>	>>			>>

Figure 31-7 Example: DVLAN Getentry 2 Command Display

In the figure above, “” denotes “filter” and “>>” denotes “forward”.

31.3.11VLAN List Command

Syntax:

192.168.1.1 vlan1q> vlan list

This command displays the entire VLAN table. The display refreshes periodically. Press [ENTER] and then enter the stop command to stop the display from refreshing. The following figure is an example what is displayed when you use this command.

IEEE 802.1Q Tagged VLAN Commands 31-9