IES-1000 User’s Guide

Figure 6-7 Installation Scenario A

Procedure To Connect To An MDF

Step 1. Connect the RJ-11 connector end of a telephone wire to one of the USER ports on the AAM1008. Step 2. Connect the other end of the telephone wire to the upper ports of the MDF using a punch-down tool. Step 3. Connect the telephone wiring from each end-user’s ADSL modem to the lower ports of the MDF.

6.4.3Installation Scenario B

Phone service is available. There is one MDF from which end-users CO connections are made (see next figure).

Hardware Connections

6-7