ZyXEL Communications IES-1000 31.3.4SVLAN CPU Command, 31.3.5SVLAN List Command, Figure 31-1Example: PVID Command Display, Make sure you set all bonded ports to have the same PVID

IES-1000 User’s Guide

This command sets the VLAN ID to a specific port in the PVID table. To display the PVID table simply enter this command without parameters, as shown next.

192.168.1.1 vlan1q> pvid port# pvid

----- -----

11

21

31

41

51

61

71

81

91

Figure 31-1 Example: PVID Command DisplayMake sure you set all bonded ports to have the same PVID.

31.3.4SVLAN CPU Command

Syntax:

192.168.1.1 vlan1q> svlan cpu [<vid>]

where

<vid> = A VLAN ID. Valid parameter range = [1 – 4094].

This command registers your CPU as a port member of the static VLAN with <vid>. To display the CPU static VLAN identification, simply enter this command without parameters, as shown next.

192.168.1.1 vlan1q> svlan cpu

31.3.5SVLAN List Command

Syntax:

192.168.1.1 vlan1q> svlan list

31-4 IEEE 802.1QTagged VLAN Commands