24.3.12List Ports Command
Syntax:
192.168.1.1 adsl> list ports
The list ports command shows the configured maximum rates, modes and states of all ADSL ports.
24.3.13Set Profile Command
Syntax:
192.168.1.1 adsl> set profile <name> [fast] <atur max rate > <atuc max rate> [ldly <atur delay> <atuc delay>][<atur ...> <atuc ...>]
<atux ...> = <target margin> <min margin> <max margin> <min rate>
where
<name> | = | The name of the profile (up to 31 characters). |
[fast] | = | This is optional to set this profile for fast latency mode Select fast |
|
| mode to use no interleaving and have faster transmission (a “fast |
|
| channel”). This would be suitable if you have a good line where little |
|
| error correction is necessary. |
<atur max rate> | = | The maximum ADSL upstream transmission rate. |
<atuc max rate> | = | The maximum ADSL downstream transmission rate. |
<atur delay> | = | The upstream interleave latency delay (0..255) milliseconds. |
<atuc delay> | = | The downstream interleave latency delay (0..255) milliseconds. |
<atur target margin> = | The upstream target ADSL signal/noise margin | |
<atur min margin> | = | The upstream minimum acceptable ADSL signal/noise margin (0- |
|
| 31db). |
<atur max margin> | = | The upstream maximum acceptable ADSL signal/noise margin (0- |
|
| 31db). |
<atur min rate> | = | The upstream minimum ADSL transmission rate in Kbps. |
<atuc target margin> = | The downstream target ADSL signal/noise margin | |
<atuc min margin> | = | The downstream minimum acceptable ADSL signal/noise margin (0- |
|
| 31db). |
<atuc max margin> | = | The downstream maximum acceptable ADSL signal/noise margin (0- |
|
| 31db). |
<atuc min rate> | = | The downstream minimum ADSL transmission rate in Kbps. |
ADSL Commands |