IES-1000 User’s Guide

 

 

Figure 10-2 Bridge Setup

The following table describes this screen.

 

 

Table 10-2 Bridge Setup

 

 

 

 

LABEL

DESCRIPTION

 

 

 

 

Operating Mode

 

 

 

 

 

Bridge Mode

Choose Normal or Fast from the drop-down list box. The Normal mode supports

 

 

802.1Q tagged VLAN (enabled in VLAN Setup), which allows tagged/untagged frames to

 

 

and from all ports. The Fast mode allows tagged frames on the LAN port and untagged

 

 

frames on the ADSL ports.

 

Apply

Click Apply to save your changes back to the IES-1000's volatile memory. The IES-1000

 

 

loses these changes if it is turned off or loses power, so use the Config Save link on the

 

 

navigation panel to the left to save your changes to the non-volatile memory when you

 

 

are done configuring.

 

 

 

 

Normal Mode

 

 

Setting

 

 

Packet Type Filter

Click this link to go to a screen for editing the packet filter type for each port.

 

 

 

 

Port Filter

Click this link to go to a screen for editing each port's egress (outgoing) ports.

 

 

 

 

MAC Filter

Click this link to go to a screen for editing the MAC filtering for each port.

 

 

 

Getting Started Screens

10-3