IES-1000 User’s Guide

 

Figure 12-4 G.SHDSL Add Profile

 

Table 12-4 G.SHDSL Add Profile

 

 

LABEL

DESCRIPTION

 

 

Port Setup

Click this link to go to the Port Setup screen.

 

 

Profile Name

When editing a profile, this is the name of this profile. When adding a profile, type a name for

 

the profile.

 

 

PSD Region

Select the Power Spectral Density (PSD) region for this profile (Annex A for North America or

 

Annex B for Europe).

 

 

Min Rate (Kbps)

Select a minimum speed from 192K to 2304K. Do not configure a minimum speed greater than

 

the maximum speed.

 

 

Max Rate (Kbps)

Select a maximum speed from 192K to 2304K. Do not configure a maximum speed less than

 

the minimum speed.

 

 

Apply

Click Apply to save your changes back to the IES-1000's volatile memory. The IES-1000 loses

 

these changes if it is turned off or loses power, so use the Config Save link on the navigation

 

panel to the left to save your changes to the non-volatile memory when you are done

 

configuring.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

12.8.2Ethernet Port Setup Screen

Ethernet Port Setup in the SAM1008 module is the same as in the AAM1008 module (see section 11.9).

12.8.3G.SHDSL Port Setup Screen

Click a G.SHDSL port in the Port Setup screen to open this screen.

G.SHDSL Module Port Setup

12-7