Table
MODULE |
| COMMAND | DESCRIPTION |
|
|
|
|
| version |
| Shows the version information of file |
|
|
| system. |
adsl |
|
| The adsl commands apply to the AAM |
|
|
| module. |
| config | save | Saves configuration of the ADSL |
|
|
| module to nonvolatile memory. |
| enable | ch <port> <vpi> <vci> | Enables the specified PVC channel(s). |
|
| chs [<start port> [<stop | Enables all PVC channels for specific |
|
| port>]] | ports. |
|
| port <port> | Enables the specified ADSL port. |
|
| ports | Enables all ADSL ports. |
| disable | ch <port> <vpi> <vci> | Disables the specified PVC |
|
|
| channel(s). |
|
| chs [<start port> [<stop | Disables all PVC channels for the |
|
| port>]] | specified ports. |
|
| port <port> | Disables the specified ADSL port. |
|
| ports | Disables all ADSL ports. |
| ldly | ldly <portsport number> | Sets or displays the maximum line |
|
| [<downstream value> <upstream | delay. |
|
| value> <SymbolMilliSec>] |
|
| linedata | <port> | Shows the line bit allocation of the |
|
|
| specified ADSL port. |
| lineinfo | <port> | Shows the line operating values of the |
|
|
| specified ADSL port. |
| lineperf | <port> | Shows the line quality of the specified |
|
|
| ADSL port. |
| linerate | <port> | Shows the line rate parameters of the |
|
|
| specified ADSL port. |
| set | ch <port> <vpi> <vci> <pvid> | Creates a new PVC channel, or |
|
| <priority> <vcp name> | modifies an existing one. |
|
| ch <port> <vpi> <vci> super | Creates a super channel, or modifies |
|
| <vcp name> | an existing one. |
|
| profile <name> [fast] <atur max | Sets an ADSL line configuration |
|
| rate> <atuc max rate> [ldly | profile. |
|
| <atur delay> <atuc delay>] |
|
|
| [<atur ...> <atuc ...>] |
|
|
| port <port> <profile> <mode> | Applies a profile setting and |
|
|
| operational mode to an ADSL port. |
|
| ports <profile> <mode> | Applies a profile setting and |
|
|
| operational mode to all ADSL ports. |
|
| pvc <port> <muxMode> <txvpi> | Sets the PVC configuration to the |
|
| <txvci> [<rxvpi> <rxvci>] | specified ADSL port. |
Commands Introduction |