ZyXEL Communications IES-1000 10.3Bridge Overview, 10.4Bridge Setup Screen, LABEL, Apply, Cancel, DESCRIPTION, Config Save

IES-1000 User’s Guide

	Table 10-1 General Setup
LABEL	DESCRIPTION
Slot ID	Type 1 or 2 for the slot ID number. The slot ID helps keep track of this individual network
	module.
Apply	Click Apply to save your changes back to the IES-1000's volatile memory. The IES-1000
	loses these changes if it is turned off or loses power, so use the Config Save link on the
	navigation panel to the left to save your changes to the non-volatile memory when you are
	done configuring.
Cancel	Click Cancel to begin configuring this screen afresh.

10.3Bridge Overview

The IES-1000 supports IEEE 802.1D transparent bridging, but not the static filtering feature or spanning tree protocol. The bridge learns the source MAC addresses of sender hosts by inspecting incoming Ethernet frames and recording the learned MAC addresses with their incoming port numbers into its filtering database. Based on the database, the bridge forwards each incoming frame to its destination port.

10.4Bridge Setup Screen

Click Bridge Setup in the navigation panel to open this screen.

10-2 Getting Started Screens