192.168.1.1 gshdsl> show profiles
The show profiles command displays the settings of all the G.SHDSL profiles.
25.3.15Set Port Command
Syntax:
192.168.1.1 gshdsl> set port <port #> <profile name>
where |
|
|
<port #> | = | The number of the port to which you want to assign a profile. |
<profile name> = | The profile that defines the minimum and maximum transfer rates for this | |
|
| port. |
The set port command assigns a specific profile to an individual port. The profile defines the maximum and minimum transmission rates and the Power Spectral Density region.
25.3.16Set Ports Command
Syntax:
192.168.1.1 gshdsl> set ports <profile name>
where |
|
<profile name> = | The profile that defines the minimum and maximum transfer rates for this |
| port. |
This CI command is like the Set Port Command described in section 25.3.15 except that this command configures all G.SHDSL ports to have a specified profile. Enter the list ports command to view the status of all ports.
25.3.17Set PVC Command
Syntax:
192.168.1.1 gshdsl> set pvc <port #> <multiplexing mode> <tx vpi> <tx vci> [<rx vpi> <rx vci>]
where |
|
|
<port #> | = | A port number, from 1 to 8. |
<multiplexing mode> | = | Either “llc” or “vc" |
<tx vpi> | = | The VPI setting of the G.SHDSL port for use with a Tx based |
|
| network. |
<tx vci> | = | The VCI setting for the G.SHDSL port for use with a Tx based |
|
| network. |
<rx vpi> | = | The VPI setting for the G.SHDSL port for use with Rx based |
|
| networks. |
<rx vci> | = | The VCI setting for the G.SHDSL port for use with Rx based |
|
|
|
| G.SHDSL Commands |