IES-1000 User’s Guide

 

 

 

Table 20-3 Log Messages

 

 

 

 

 

 

 

 

LOG MESSAGE

TYPE

 

 

 

DESCRIPTION

 

 

 

 

 

 

ADSL <port> Link

WARN

 

An ADSL port lost its connection.

 

Down(SN=<seq no>)

 

 

<port>

 

- port number

 

 

 

 

<seq no>

 

- sequence number of the connection

 

 

 

 

 

 

ADSL <port> Link

WARN

 

An ADSL port established a connection.

 

Up(SN=<seq no>): <us

 

 

<ds rate>

 

- downstream rate

 

rate>/<ds rate>

 

 

<us rate>

 

- upstream rate

 

 

 

 

 

 

 

 

 

 

 

Insecure SNMP From <ip

WARN

 

Someone tried to start an SNMP session from an IP address that did

 

addr>

 

 

not match any of the configured secured client IP addresses.

 

Incorrect SNMP

WARN

 

Someone attempted to use the wrong password to start an SNMP

 

Password

 

 

session.

 

 

 

CONSOLE Session End

INFO

 

A console session has terminated.

 

CONSOLE Session Begin

INFO

 

A console session has started.

 

FTP Session End

INFO

 

An FTP session has terminated.

 

FTP Session Begin

INFO

 

An FTP session has started.

 

Insecure FTP From <ip

WARN

 

Someone tried to start an FTP session from the listed IP address and

 

addr>

 

 

it did not match any of the configured secured client IP addresses.

 

Collision at

WARN

 

Someone attempted to use FTP or the web configurator to upload

 

downloading file!

 

 

firmware but the upload conflicted with another process (maybe

 

 

 

 

someone else was using another method to upload firmware at the

 

 

 

 

same moment).

 

 

 

 

 

 

 

Incorrect FTP Password

WARN

 

Someone attempted to use the wrong password to start an FTP

 

 

 

 

session.

 

 

 

Reboot System

WARN

 

The network module is restarting after a firmware upload via FTP or

 

 

 

 

console port, or due to a command invoked by an administrator.

 

Received Image

WARN

 

A checksum error was detected during an attempted FTP firmware

 

Checksum Error

 

 

upload.

 

 

 

Invalid Image

WARN

 

Someone attempted to use FTP upload a firmware file with a wrong

 

 

 

 

identity.

 

 

 

File Size Too Large

WARN

 

The file size was too large with an attempted FTP firmware upload.

 

Receive <file name> OK

WARN

 

A file was uploaded to the network module by FTP.

 

 

 

 

<file name>

- received file’s name

 

 

 

 

 

 

GSHDSL

WARN

 

The temperature detected in the G.SHDSL module was too high.

 

OVER_HEAT_ACTIVE:

 

 

<temp>

- temperature when the entry was logged

 

<temp>

 

 

 

 

 

 

GSHDSL

WARN

 

The temperature detected in the G.SHDSL module has come back to

 

OVER_HEAT_RELEASE:

 

 

normal.

 

 

 

<temp>

 

 

<temp>

- temperature when the entry was logged

 

 

 

 

 

 

 

 

 

 

 

Diagnostic

20-3