IES-1000 User’s Guide

 

Table 20-4 DSL Line Diagnostic

 

 

LABEL

DESCRIPTION

 

 

Port

This refers to the DSL port number. Select a port upon which you want to perform a loopback

 

test.

 

 

Local Loopback

Click this to perform a local loopback test on the specified DSL port. A local loopback test is

 

used to check the device's DSL chip. A local loopback test failure indicates an internal device

 

problem.

 

 

OAM F5

Click this to perform an OAM F5 loopback test on the specified DSL port. An Operation,

Loopback

Administration and Maintenance Function 5 test is used to test the connection between two DSL

 

devices. First, the DSL devices establish a virtual circuit. Then the local device sends an ATM

 

F5 cell to be returned by the remote DSL device (both DSL devices must support ATM F5 in

 

order to use this test). The results (“Passed” or “Failed”) display in the multi-line text box.

 

 

20.3.3Reset System

Click Diagnostic in the navigation panel and then click the Reset System button and click OK to restart the system.

Figure 20-3 Reboot System Confirmation

20.4Logout Screen

Click Logout in the navigation panel to open this screen and exit the web configurator.

20-6

Diagnostics