IES-1000 User’s Guide

 

 

Table 12-5 G.SHDSL Port Setup

 

 

 

 

 

LABEL

DESCRIPTION

 

 

 

 

 

 

Default VLAN

Type the Port VLAN ID (PVID) from 1 to 4094. The IES-1000 assigns the PVID to untagged

 

 

ID

frames or priority frames (0 VID) received on this port.

 

 

 

 

 

 

GVRP

GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a way for

 

 

 

switches to register necessary VLAN members on ports across the network. The IES-1000

 

 

 

propagates VLAN information to other devices when this check box is selected.7

 

 

VLAN

Select All if you want the port to accept both tagged and untagged incoming frames (on this

 

 

Acceptable

port). Choose Tagged if you want the port to accept just tagged incoming frames (on this

 

 

Frame Type

port). 8

 

 

Apply

Click Apply to save your changes back to the IES-1000's volatile memory. The IES-1000

 

 

 

loses these changes if it is turned off or loses power, so use the Config Save link in the

 

 

 

navigation panel on the left to save your changes to the non-volatile memory when you are

 

 

 

done configuring.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

 

 

 

12.8.4Add G.SHDSL N-wire Group

Click Add in the Port Setup screen (under the n-wire table) to go to the Add G.SHDSL N-wire Group screen.

Figure 12-6 Add G.SHDSL N-wire Group

7At the time of writing, GVRP is not available with the DSL ports.

8At the time of writing, the VLAN Acceptable Frame Type field is read-only. The IES-1000 accepts both tagged and untagged incoming frames.

G.SHDSL Module Port Setup

12-9