IES-1000 User’s Guide

 

 

Figure 10-6 Edit Bridge Port Filter Setup

The following table describes this screen.

 

 

Table 10-5 Edit Bridge Port Filter Setup

 

LABEL

DESCRIPTION

 

 

 

 

Bridge Setup

Click this link to go to the Bridge Setup screen.

 

 

 

 

Bridge Port Filter

Click this link to go to the Bridge Port Filter Setup screen.

 

Setup

 

 

All

Select this check box to forward packets to all ports.

 

 

 

 

E

Select this check box to forward packets to the Ethernet port.

 

 

 

 

1-8

Select one or more of these check boxes in order to forward packets to specific DSL ports.

 

 

 

 

Apply

Click Apply to save your changes back to the IES-1000's volatile memory. The IES-1000

 

 

loses these changes if it is turned off or loses power, so use the Config Save link on the

 

 

navigation panel to the left to save your changes to the non-volatile memory when you are

 

 

done configuring.

 

 

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

 

10.5.2MAC Filter Setup Screen

Click MAC Filter Setup in the Bridge Setup screen to open this screen.

Getting Started Screens

10-7