ZyXEL Communications IES-1000 Bridge MAC Filter Entry Add Screen, LABEL, Apply, LABEL, Apply, DESCRIPTION, Config Save, DESCRIPTION, Bridge Setup, Bridge Setup, Bridge MAC Filter Setup

IES-1000 User’s Guide

	Table 10-7 Bridge MAC Filter Entry List
LABEL	DESCRIPTION
Bridge Setup	Click this link to go to the Bridge Setup screen.
Bridge MAC	Click this link to go to the Bridge MAC Filter Setup screen.
Filter Setup
Filtering Enable	Select this check box to enable MAC filtering on this port.
Apply	Click Apply to save your changes back to the IES-1000's volatile memory. The IES-1000
	loses these changes if it is turned off or loses power, so use the Config Save link on the
	navigation panel to the left to save your changes to the non-volatile memory when you are
	done configuring.
MAC Address	This field lists the MAC addresses that are set for this port.
Add	Click this button to add the MAC address in the edit box to the list in the list box.
Delete	Select a MAC address in the list box and click this button to delete the MAC address from
	the list.

Bridge MAC Filter Entry Add Screen

Click Add in the Bridge MAC Filter Setup screen to open this screen.

		Figure 10-9 Bridge MAC Filter Entry Add
The following table describes this screen.
		Table 10-8 Bridge MAC Filter Entry Add
	LABEL	DESCRIPTION
	Bridge Setup	Click this link to go to the Bridge Setup screen.
	Bridge MAC	Click this link to go to the Bridge MAC Filter Setup screen.
	Filter Setup
	Bridge MAC	Click this link to go to the Bridge MAC Filter Entry List screen.
	Filter Entry List
	Add MAC	Type a MAC address in hexadecimal notation (xx:xx:xx:xx:xx:xx, where x is a number from
	Address	0 to 9 or a letter from a to f) in this field. The MAC address cannot be a multicast or
		broadcast address. Then click Apply.

Getting Started Screens 10-9