This command changes the management password. The management password is used for authentication at console or Telnet login. This command is only allowed for local console management sessions. The management password must be from 1 to 8 characters long and any character is accepted. The factory default password is “1234”.
It is very important that you remember your password. If you forget it, refer to the
Troubleshooting section for help.23.2.5Config Print Command
Syntax:
192.168.1.1> config print
This command lists all current system configuration settings.
23.2.6Exit Command
Syntax:
192.168.1.1> exit
This command terminates the console or telnet management session.
23.3Sys Commands
23.3.1Info Command
Syntax:
192.168.1.1 sys> info
This command displays system related information.
23.3.2Set Name Command
Syntax:
192.168.1.1 sys> set name <name>
This command allows you to set the name of your
23.3.3Set Contact Command
Syntax:
System Commands |