rear panel
A. Speaker Outputs – These are speaker level (powered) output jacks designed to feed each of your Passport speaker enclosures. Use the enclosed cables (or other speaker cable) to connect the Passport’s speakers to the power tower.
B. AC connector/ Line cord – The Passport is equipped with a grounding type IEC supply cord to reduce the possibility of shock hazard. Be sure to connect it to a grounded AC receptacle. DO not alter the AC
plug.
C. POWER SWITCH – Turns the AC power ON and Off. When the switch is in the OFF position, your Passport is completely shut down.
The power mains (AC) fuse and fuse holder are under the IEC (power cord) socket. Replacement fuses must be of the same rating (T6.3AH, 250V) and size as originally equipped. To replace a blown fuse, remove the IEC power cord. Pull out the fuse holder and find the spare fuse inside.
rear storage compartment
A small storage compartment can be found on the rear of the Passport tower. To access this compartment, simply lift the latch and pull open the storage door. This compartment is ideal for storing cables, microphones or other items when you are transporting your Passport.
On the back panel of the storage compartment you will see a narrow metal strip with a screw on either end. This is the protective cover for the wireless adapter terminal. Custom wireless systems are available for your Passport. The receiver for the wireless system installs in the storage compartment.
12