set-up and connections
Power Tower™
In setting up the system, the Passport Mixing console should ideally be placed where system performance can be evaluated by the operator. If no ongoing adjustments will be necessary, the mixer may be placed conveniently and where the cable lengths allow.
specifications
Part Number | ||
| ||
| ||
| 230V UK | |
| 230V EUR | |
|
Take care to place the Power Tower where the cables will not trip anyone. All cables should be carefully secured.
The storage compartment in the rear of the Tower can hold cables, microphones and other system parts. To open simply slide the catch upwards and pull open.
The mains (AC) fuse holder is under the IEC (power cord) socket on the right rear of the Tower. To change a fuse, remove the IEC plug and, using an appropriate tool pull out the fuse holder. Note there is a spare fuse in the fuse holder; the Passport utilizes a T6.3AH, 250V fuse. Only replace fuses with one of an identical value and size.
The Passport System is weather resistant in
Frequency Response
Distortion
System Signal to Noise Ratio
Power Output
Input Impedance
(Channels
(Phono and Stereo Channel 1/4”)
Max. Input Level
50 Hz to 30 kHz ± 1 dB (at speaker output) 30 Hz to 20 kHz ± 1 dB (at send output)
<0.5% 20 Hz to 20 kHz (at speaker output)
<0.1% 20 Hz to 20 kHz (at send output)
> 85 dB, “A” WTD
250 W (125 W/ch @ 8ohm per channel)
“Mic” switch position: 2 k ohm
“Line” switch position: 66 k ohm 78 k ohm
Mic: | |
Line: | 20 dBu |
Stereo: | 26 dBu |
its packed transport mode. However, when operating outdoors, take care to fully protect the Power Tower in the event of exposure to rain.
Remember to allow free air flow through the air inlet located at the bottom of the rear panel on the Passport power tower.
Return Input Impedance | 47k ohm |
|
Fuse type | T6.3AH, 250V | |
Passport System | Width: | 840 mm (33.7 in.) |
| Height: | 615 mm (24.2 in.) |
| Depth: | 300 mm (11.8 in.) |
| Weight: | 24 kgs (53 lbs) |
Speakers | Width: | 300 mm (13.4 in.) |
| Height: | 610 mm (24.2 in.) |
| Depth: | 300 mm (11.8 in.) |
| Weight: | 7.3 kgs (16 lbs) |
Power Tower | Width | 185 mm (7.3 in.) |
| Height | 615 mm (24.2 in.) |
| Depth | 300 mm (11.8 in.) |
| Weight | 9.5 kgs (21 lbs) |
Tower Footprint | 350 x 300 mm (9.5 x 11.75 in.) | |
Microphone | Dynamic Cardioid, balanced | |
Microphone Cable | XL | |
Speaker Cables | 1/4 in. to 1/4 in., 9 m (27 feet) | |
| 0 dBu is referenced to 0.775 volts rms |
14