3Com WX1200 display fdb count

display fdb count 105

See Also

set fdb agingtime on page 114

display fdb count Lists the number of entries in the forwarding database.

Syntax — display fdb count {perm | static | dynamic}

[vlan vlan-id]

perm — Lists the number of permanent entries. A permanent entry

does not age out and remains in the database even after a reboot,

reset, or power cycle.

static — Lists the number of static entries. A static entry does not

age out, but is removed from the database after a reboot, reset, or

power cycle.

dynamic — Lists the number of dynamic entries. A dynamic entry is

automatically removed through aging or after a reboot, reset, or

power cycle.

vlan vlan-id — VLAN name or number. Entries are listed for only the

specified VLAN.

Defaults — None.

Access — All.

History —Introduced in MSS Version 3.0.

The following command lists the number of dynamic entries that the

forwarding database contains:

WX1200# display fdb count dynamic

Total Matching Entries = 2