3Com WX1200 set mobility-domain mode member

270 CHAPTER 9: MOBILITY DOMAIN COMMANDS

set mobility-domain mode member

seed-ip

On a nonseed WX switch, sets the IP address of the seed WX switch. This

command is used on a member WX to configure it as a member. If the

WX switch is currently part of another Mobility Domain or using another

seed, this command overwrites that configuration.

Syntax — set mobility-domain mode member seed-ip ip-addr

ip-addr — IP address of the Mobility Domain member, in dotted

decimal notation.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Examples — The following command sets the current WX switch as a

nonseed member of the Mobility Domain whose seed has the IP address

192.168.1.8:

WX4400# set mobility-domain mode member seed-ip 192.168.1.8

mode is: member

seed IP is: 192.168.1.8