3Com WX1200 set rf detect

556 CHAPTER 19: RF DETECTION COMMANDS

Examples — The following command adds client MAC address

11:22:33:44:55:66 to the black list:

WX1200# set rfdetect black-list 11:22:33:44:55:66

success: MAC 11:22:33:44:55:66 is now blacklisted.

See Also

set rfdetect black-list on page 555

display rfdetect black-list on page 538

set rf detect

countermeasures

Enables or disables countermeasures for the Mobility Domain.

Countermeasures are packets sent by a radio to prevent clients from

being able to use a rogue access point.

CAUTION: Countermeasures affect wireless service on a radio. When a

MAP radio is sending countermeasures, the radio is disabled for use by

network traffic, until the radio finishes sending the countermeasures.

Syntax — set rfdetect countermeasures {enable | disable}

enable — Enables countermeasures.

disable — Disables countermeasures.

Defaults — Countermeasures are disabled by default.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — This command is valid only on the seed switch of the Mobility

Domain.

Examples — The following command enables countermeasures for the

Mobility Domain managed by this seed switch:

WX1200# set rfdetect countermeasures enable

success: countermeasures are now enabled.