3Com WX1200 The following command uses the terse option to display brief information for Distributed MAPs:, Table56 and Table 57 describe the fields in this display.

306 CHAPTER 11: MANAGED ACCESS POINT COMMANDS

The following command uses the terse option to display brief information for Distributed MAPs:

WX4400# display dap status terse

Total number of entries: 4

Operational: 1, Image Downloading: 0, Unknown: 3, Other: 0

Flags: o = operational, b = booting, d = image downloading

c = configuring, f = configuration failed

a = auto DAP, i = insecure

Port Flg IP Address Model MAC Address Radio1 Radio2 Uptime

------ --- ------------- ------ ----------------- ------ ------ ------------

3 --- MP-372 D ?/? D ?/? 0d 0h 0m 0s

Dap 1 --- MP-372 D ?/? D ?/? 0d 0h 0m 0s

Dap 2 --- MP-372 D ?/? D ?/? 0d 0h 0m 0s

Dap100 oa- 10.8.255.11 MP-122 00:0b:0e:da:da:82 E 1/17 E36/11 0d 0h 0m17s

Table56 and Table 57 describe the fields in this display.

Field Description

DAP Connection ID for the Distributed MAP.

Note: This field is applicable only if the MAP is configured on

the WX switch as a Distributed MAP.

Port WX port number.

Note: This field is applicable only if the MAP is directly

connected to the WX switch and the WX switch’s port is

configured as a MAP access port.

IP-addr IP address of the MAP. The address is assigned to the MAP

by a DHCP server.

Note: This field is applicable only if the MAP is configured on

the WX switch as a Distributed MAP.

AP model MAP access point model number.

manufacturer Company that made the MAP access point.

fingerprint Hexadecimal fingerprint of the MAP’s public encryption key.

This field is displayed only for Distributed MAPs.

name MAP access point name.

Link Status of this link with the MAP access point and the MAP

port at the other end of the link. The status can be up or

down.