3Com WX1200 display log config

612 CHAPTER 23: SYSTEM LOG COMMANDS
See Also
clear log on page 609
display log config on page 612
display log config Displays log configuration information.
Syntax — display log config
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To display how logging is configured, type the following
command:
WX4400# display log config
Logging console: disabled
Logging console severity: DEBUG
Logging sessions: disabled
Logging sessions severity: INFO
Logging buffer: enabled
Logging buffer severity: DEBUG
Logging trace: enabled
Logging trace severity: DEBUG
Logging buffer size: 10485760 bytes
Log marking: disabled
Log marking severity: NOTICE
Log marking interval 300 seconds
Logging server: 10.1.1.10 severity DEBUG
Current session: disabled
Current session severity: INFO
See Also
set log on page 614
clear log on page 609