display arp 137
History — Introduced in MSS Version 3.0.
Examples — To return the WX switch’s real-time clock to UTC, type the
following command:
WX4400# clear timezone
success: change accepted.
See Also
clear summertime on page 135
set summertime on page 191
set timedate on page 193
set timezone on page 194
display summertime on page 154
display timedate on page 155
display timezone on page 155
display arp Shows the ARP table.
Syntax — display arp [ip-addr]
ip-addr — IP address.
Defaults — If you do not specify an IP address, the whole ARP table is
displayed.
Usage — All.
History —Introduced in MSS Version 3.0.
Examples — The following command displays ARP entries:
WX4400# display arp
ARP aging time: 1200 seconds
Host HW Address VLAN Type State
------------------------------ ----------------- ----- ------- --------
10.5.4.51 00:0b:0e:02:76:f5 1 DYNAMIC RESOLVED
10.5.4.53 00:0b:0e:02:76:f7 1 LOCAL RESOLVED