3Com WX1200 - page 247

set location policy 247

You can optionally add the suffixes .in and .out to inacl-name and

outacl-name so that they match the names of security ACLs stored in the

local WX database.

Examples — The following command denies network access to all users

at *.theirfirm.com, causing them to fail authorization:

WX4400# set location policy deny if user eq *.theirfirm.com

The following command authorizes access to the guest_1 VLAN for all

users who are not at *.wodefirm.com:

WX4400# set location policy permit vlan guest_1 if user neq

*.wodefirm.com

The following command authorizes users at *.ny.ourfirm.com to access

the bld4.tac VLAN instead, and applies the security ACL tac_24 to the

traffic they rece ive:

WX4400# set location policy permit vlan bld4.tac

outacl tac_24 if user eq *.ny.ourfirm.com

The following command authorizes access to users on VLANs with names

matching bld4.* and applies security ACLs svcs_2 to the traffic they send

and svcs_3 to the traffic they receive:

WX4400# set location policy permit inacl svcs_2 outacl svcs_3

if vlan eq bldg4.*

The following command authorizes users entering the network on WX

ports 1 and 2 to use the floor2 VLAN, overriding any settings from AAA:

WX4400# set location policy permit vlan floor2 if port 1-2

The following command places all users who are authorized for SSID

tempvendor_a into VLAN kiosk_1:

WX1200# set location policy permit vlan kiosk_1 iff ssid eq

tempvendor_a

success: change accepted