334 CHAPTER 11: MANAGED ACCESS POINT COMMANDS
Examples — The following command changes the name of the MAP
access point on port 1 to techpubs:
WX1200# set ap 1 name techpubs
success: change accepted.
See Also
display {ap | dap} config on page 290
set {ap | dap} radio antennatype
Sets the model number for an external antenna.
Syntax — set {ap port-list | dap dap-num} radio {1|2} antennatype
{ANT1060 |ANT1120 |ANT1180 |
ANT5060 |ANT5120 |ANT5180 |
ANT-1360-OUT | ANT-5360-OUT |ANT-5120-OUT | internal}
ap port-list — List of ports connected to the MAP access points on
which to set the channel.
dap dap-num — Number of a Distributed MAP on which to set the
channel.
radio 1 — Radio 1 of the MAP.
radio 2 — Radio 2 of the MAP. (This option does not apply to
single-radio models.)
antennatype {ANT1060 |ANT1120 |ANT1180 | internal} —
802.11b/g external antenna models:
ANT1060 — 60° 802.11b/g antenna
ANT1120 — 120° 802.11b/g antenna
ANT1180 — 180° 802.11b/g antenna
internal — uses the internal antenna instead
antennatype {ANT5060 |ANT5120 |ANT5180 | internal} —
802.11a external antenna models:
ANT5060 — 60° 802.11a antenna
ANT5120 — 120° 802.11a antenna
ANT5180 — 180° 802.11a antenna
internal — uses the internal antenna instead