display ntp 149
Examples — The following command shows the status and port number
for the Telnet management interface to the WX switch:
WX4400> display ip telnet
Server Status Port
----------------------------------
Enabled 23
Table38 describes the fields in this display.
See Also
clear ip telnet on page 131
display ip https on page 145
set ip https server on page 167
set ip telnet on page 171
set ip telnet server on page 172
display ntp Shows NTP client information.
Syntax — display ntp
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Table38 Output for display ip telnet
Field Description
Server Status State of the HTTPS server:
Enabled
Disabled
Port TCP port number on which the WX switch listens for Telnet
management traffic.