516 CHAPTER 17: 802.1X MANAGEMENT COMMANDS
See Also
display dot1x on page 505
clear dot1x timeout auth-server on page 504
set dot1x timeout supplicant
Sets the number of seconds that must elapse before the WX switch times
out an authentication session with a supplicant (client).
Syntax — set dot1x timeout supplicant seconds
seconds — Specify a value between 1 and 65,535.
Defaults — The default is 30 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — Type the following command to set the number of seconds
for authentication session timeout to 300:
WX4400# set dot1x timeout supplicant 300
success: dot1x supplicant timeout set to 300.
See Also
display dot1x on page 505
clear dot1x timeout auth-server on page 504
set dot1x tx-period Sets the number of seconds that must elapse before the WX switch
retransmits an EAPoL packet.
Syntax — set dot1x tx-period seconds
seconds — Specify a value between 1 and 65,535.
Defaults — The default is 5 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.