
2ACCESS COMMANDS
This chapter describes access commands used to control access to the
Mobility Software System (MSS) command-line interface (CLI).
Commands by
Usage
This chapter presents access services commands alphabetically. Use
Table5 to located commands in this chapter based on their use.
disable Changes the CLI session from enabled mode to restricted access.
Syntax — disable
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command restricts access to the CLI for the
current session:
WX1200# disable
WX1200>
See Also
enable on page 34
Tabl e 5 Access Commands by Usage
Type Command
Access Privileges enable on page34
set enablepass on page 35
disable on page 33
quit on page 34