3Com WX1200 set ip ssh server , set ip telnet

set ip ssh server 171
set ip ssh server Disables or reenables the SSH server on a wireless LAN switch.
CAUTION: If you disable the SSH server, SSH access to the WX switch is
also disabled.
Syntax — set ip ssh server {enable | disable}
enable — Enables the SSH server.
disable — Disables the SSH server.
Defaults — The SSH server is enabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — You must generate an SSH authentication key to use SSH.
The maximum number of SSH sessions supported on a WX switch is
eight. If Telnet is also enabled, the WX switch can have up to eight Telnet
or SSH sessions, in any combination, and one Console session.
See Also
crypto generate key on page 473
set ip ssh on page 170
set ip ssh server on page 171
set ip telnet Changes the TCP port number on which a wireless LAN switch listens for
Telnet management traffic.
CAUTION: f you change the Telnet port number from a Telnet session,
MSS immediately ends the session. To open a new management session,
you must Telnet to the WX switch with the new Telnet port number.
Syntax — set ip telnet port-num
port-num — TCP port number.
Defaults — The default Telnet port number is 23.
Access — Enabled.