6
QUALITY OF SERVICE COMMANDS
Use Quality of Service (QoS) commands to configure packet prioritization
in MSS. Packet prioritization ensures that WX switches and MAP access
points give preferential treatment to high-priority traffic such as voice and
video.
(To override the prioritization for specific traffic, use access controls lists
[ACLs] to set the Class of Service [CoS] for the packets. See “Security ACL
Commands” on page 445.)
Commands by
Usage
This chapter presents QOS commands alphabetically. Use Table27 to
locate commands in this chapter based on their use.
Table27 QOS Commands by Usage
Type Command
QOS Settings display qos on page123
display qos dscp-table on page124
set qos cos-to-dscp-map on page121
set qos dscp-to-cos-map on page122
clear qos on page120
6