3Com WX1200 clear snmp notify , clear snmp usm

134 CHAPTER 7: IP SERVICES COMMANDS
See Also
set snmp notify profile on page 177
display snmp notify profile on page 152
clear snmp notify
target
Clears an SNMP notification target.
Syntax — clear snmp notify target target-num
target-num — ID of the target.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Examples — The following command clears notification target 3:
WX1200# clear snmp notify target 3
success: change accepted.
See Also
set snmp notify target on page 181
display snmp notify target on page 152
clear snmp usm Clears an SNMPv3 user.
Syntax — clear snmp usm usm-username
usm-username — Name of the SNMPv3 user you want to clear.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.