3Com WX1200 set service-profile wpa-ie

set service-profile wpa-ie 391

set service-profile wpa-ie

Enables the WPA information element (IE) in wireless frames. The WPAIE

advertises the WPA authentication methods and cipher suites supported

by radios in the radio profile mapped to the service profile.

Syntax — set service-profile name wpa-ie {enable | disable}

name — Service profile name.

enable — Enables the WPA IE.

disable — Disables the WPA IE.

Defaults — The WPA IE is disabled by default.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — When the WPA IE is enabled, the default authentication

method is 802.1X. There is no default cipher suite. You must enable the

cipher suites you want the radios to support.

Examples — The following command enables the WPA IE in service

profile sp2:

WX4400# set service-profile sp2 wpa-ie enable

success: change accepted.