496 CHAPTER 16: RADIUS AND SERVER GROUP COMMANDS
Examples — To set a RADIUS server named RS42 with IP address
198.162.1.1 to use the default accounting and authorization ports with a
timeout interval of 30 seconds, two transmit attempts, 5 minutes of dead
time, and a key string of keys4u, type the following command:
WX1200# set radius server RS42 address 198.162.1.1 timeout 30
retransmit 2 deadtime 5 key keys4U
See Also
display aaa on page 219
set authentication admin on page 229
set authentication console on page 231
set authentication dot1x on page 233
set authentication last-resort on page 236
set authentication mac on page 239
set authentication web on page 242
set radius on page 490
set server group on page 496
set server group Configures a group of one to four RADIUS servers.
Syntax — set server group group-name members server-name1
[server-name2] [server-name3] [server-name4]
group-name — Server group name of up to 32 characters, with no
spaces or tabs.
members server-name1, server-name2, server-name3,
server-name4 — The names of one or more configured RADIUS
servers. You can enter up to four server names.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — You must assign all group members simultaneously, as shown
in the example. To enable load balancing, use set server group
load-balance enable.