3Com WX1200 set ip dns domain

set ip dns domain 165

See Also

clear ip dns domain on page 129

clear ip dns server on page 129

display ip dns on page 144

set ip dns domain on page 165

set ip dns server on page 166

set ip dns domain Configures a default domain name for DNS queries. The wireless LAN

switch appends the default domain name to domain names or

hostnames you enter in commands.

Syntax — set ip dns domain name

name — Domain name of between 1 and 64 alphanumeric characters

with no spaces (for example, example.org).

Defaults — None.

Access — Enabled.

Usage — To override the default domain name when entering a

hostname in a CLI command, enter a period at the end of the hostname.

For example, if the default domain name is example.com, enter chris. if

the fully qualified hostname is chris and not chris.example.com.

Aliases take precedence over DNS. When you enter a hostname, MSS checks

for an alias with that name first, before using DNS to resolve the name.

Examples — The following command configures the default domain

name example.com:

WX1200# set ip dns domain example.com

Domain name changed