3Com WX1200 set mobility-profile

set mobility-profile mode 257
The following command adds port 3 to the magnolia Mobility Profile
(which is already assigned to port 2):
WX1200# set mobility-profile name magnolia port 3
success: change accepted.
See Also
clear mobility-profile on page 215
display mobility-profile on page 224
set mac-user attr on page 249
set mac-usergroup attr on page 254
set mobility-profile mode on page 257
set user attr on page 259
set usergroup on page 261
set mobility-profile
mode
Enables or disables the Mobility Profile feature on the WX switch.
CAUTION: When the Mobility Profile feature is enabled, a user is denied
access if assigned a Mobility-Profile attribute in the local WX switch
database or RADIUS server when no Mobility Profile of that name exists
on the WX switch.
Syntax — set mobility-profile mode {enable | disable}
enable — Enables the use of the Mobility Profile feature on the WX
switch.
disable — Specifies that all Mobility Profile attributes are ignored by
the WX switch.
Defaults — The Mobility Profile feature is disabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To enable the use of the Mobility Profile feature, type the
following command:
WX1200# set mobility-profile mode enable
success: change accepted.