550 CHAPTER 19: RF DETECTION COMMANDS
See Also
display rfdetect data on page 544
display rfdetect visible on page 552
display rfdetect ssid-list
Displays the entries in the permitted SSID list.
Syntax — display rfdetect ssid-list
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Crypto-Types Encryption type:
clear (no encryption)
ccmp
tkip
wep104 (WPA 104-bit WEP)
wep40 (WPA 40-bit WEP)
wep (non-WPA WEP)
WX-IPaddress System IP address of the WX switch that detected the rogue.
Port/Radio/Channel Port number, radio number, and channel number of the radio
that detected the rogue. For a Distributed MAP, the
connection number is labeled dap. (This stands for distributed
ap.)
Mac MAC address of the radio that detected the rogue.
Device-type Device type detected by the MAP radio.
Adhoc Ad-hoc status (yes or no) detected by the MAP radio.
Crypto-Types Encryption type detected by the MAP radio.
RSSI Received signal strength indication (RSSI)—the strength of the
RF signal detected by the MAP radio, in decibels referred to
1milliwatt (dB m).
SSID SSID mapped to the BSSID.
Table100 display rfdetect mobility-domain ssid or bssid Output (continued)
Field Description